Prepublication List of Papers
to be Published in Future Issues of
Wood and Fiber Science

Each title below includes a link to the PDF file of the article. Note that these articles can not be edited or printed.  At the end of each title is the probable issue of publication followed by the  official date of publication. When the hard copy is published, the links to the PDFs will be replaced by a link to Metapress where the articles can be viewed. If you wish to cite any of these “preprints,” be sure to add the URL (http://www.swst.org/prePublication.html) at the end of the citation.

Papers that were previously posted here as "preprints", starting with issue 41(1), can now be accessed in hard copy in that issue or digitally through Metapress.

Papers that will appear in future issues

Liang, Shanqing and Feng Fu. 2011. Strength loss and hazard assessment of Euphrates poplar using stress wave tomography. 10/25/12.

Wang, Wang, Jinzhen Cao, Futong Cui, and Xing Wang. 2011. Effect of pH on chemical components and mechanical properties of thermally modified wood. 10/25/12.

Gozdecki, Cezary, Arnold Wilczyński, Marek Kociszewski, Jolanta Tomaszewska, and Stanisław Zajchowski. 2011. Mechanical properties of wood-polypropylene composites with industrial wood particles of different sizes. 10/28/2011.

Ahmed, Sheikh Ali and Tom Morén. 2011. Moisture properties of heat-treated Scots pine and Norway spruce sapwood impregnated with wood preservatives. 11/28/11.

Zhouyang, Xiang, Perry Peralta, and Ilona Peszlen. 2011. Lumber drying stresses and mitigation of cross-sectional deformation. 11/28/11.

Wang, Brad Jianhe and Ying Hei Chui. 2011. Performance evaluation of phenol formaldehyde resin-impregnated veneers and laminated veneer lumber. 11/30/11.

Yadama, Vikram, Eini C. Lowell, and Christopher E. Langum. 2011. Characterization of wood strands from young, small-diameter Douglas-fir and western hemlock trees. 11/30/11.

Bergman, Richard D. and Scott A. Bowe. 2011. Life-cycle inventory of manufacturing hardwood lumber in southeastern US. 12/5/12.

Rice, R.W. 2011. Editorial: SWST program accreditation: our foundations, our past and our future. 12/5/12.

Kim, Jae-Woo, David P. Harper, and Adam M. Taylor. 2011. Technical note: Effect of epoxy embedment on micromechanical properties of brown-rot-decayed wood cell walls assessed with nanoindentation. 12/5/12.

Horvath, Laszlo, Perry Peralta, Ilona Peszlen, Levente Csoka, Balazs Horvath, and Joseph Jakes. 2011. Modeling hygroelastic properties of genetically modified aspen. 12/5/12.

Ishiguri, Futoshi, Kazuya Iizuka, Jun Tanabe, Soekmana Wedatama, Shinso Yokota, Nobuo Yoshizawa, and Sapit Diloksumpun. 2011. Technical note: Solid wood properties of Eucalyptus camaldulensis planted for pulpwood production in Thailand. 12/15/11.

Atta-Obeng, Emmanuel, Brian K. Via, and Oladiran Fasina. 2011. Effect of microcrystalline cellulose, species, and particle size on mechanical and physical properties of particleboard. 12/22/11.

Segerholm, B. Kristoffer, Stefan Vellekoop, and Magnus E.P. Wålinder. 2012. Process-related mechanical degradation of the wood component in high-wood-content wood-plastic composites. 1/4/12.

Matsumoto, Noah and John A. Nairn. 2012. Fracture toughness of wood and wood composites during crack propagation. 1/13/12.

Sekerden, Filiz. 2012. Effect of pile yarn type on absorbency, stiffness, and abrasion resistance of bamboo/cotton and cotton terry towels. 1/25/12.

Thesis and dissertation titles. 2012. (or see http://www.swst.org/wfs/thesistitles.html)

Wu, Yu, Xiao-Juan Jin, Ming-Yang Zhang, and Dan Xu. 2012. Phenol absorption on nitrogen-enriched activated carbon from fiberboard waste. 1/26/12.

Yafang, Lei, Jia Ting, and Song Xiaozhou. 2012. Chemical composition of cork from Quercus variablis. 2/3/12.

Lin, Cheng-Jung, Chih-Hsin Chung, Chih-Lung Cho, and Te-Hsin Yang. 2012. Tree ring characteristics of 30-year-old Swietenia macrophylla plantation trees. 2/3/2012.